Thunderbird Community Forum

Problem: How can I configure Junk Settings such that all emails from a particular domain are not treated as Junk?

In Junk Settings, I have:

• Enabled "adaptive junk mail controls" w/ "Do not automatically mark mail as junk if the sender is in: Collected & Personal Address Book".
• In "Collected Addresses" address book, I created "*@some-safe-domain.com" entry.

However, emails from that domain are still going to Junk folder.

How do I configure Thunderbird such that all emails from a particular domain are configured as NOT Junk?

Dear community, I have recently updated my Thinkpad from kubuntu 22.04 to 24.04, which included an update of thunderbird to version 128.1.0esr (and a switch to a snap package).

However, when I type into the quick filter bar, (i) the whole thunderbird GUI freezes until the filter was applied to my several thousand emails, (ii) which also seems to take much longer than before. Before the update, the filter took maybe ~0.5 seconds or less, it now takes ~4 seconds. A lot for just a few thousand emails. Btw, the same happens if I empty the quick filter field. Just that it seems to take now even longer until it shows all of my emails.

I don't know if anyone can help. I feel more this could be something for a bug report?

Thanks a lot in advance, Matthias

I converted as advised and then updated to the newest version. I lost everything except the messages: the Address Book, Tags, Message Filters, and Folders are all gone. This is a disaster after 15+ years with Thunderbird. It started when I copied the folder "profiles" from my laptop to my PC for the 1,000th time. Is there a simple step-by-step solution? Without the history or apologies etc. etc? Just "do this?" My solution now is to do all my email on my laptop. Ugh!

Hi community, I have browsed a bit in the web but haven't found a solution.

I'm a long-term Thunderbird user having this as my to-go-mail-client on every computer since almost 20 years and have always been happy with it. However since the last major update to 128.0.1 my Thunderbird has become very unresponsive whenever I start it or I receive an email.

I have 3 mail accounts in my Thunderbird set up. Two accounts are using POP, these seem to work as expected. The third account is a (company)-Google account that syncs mails via IMAP. Whenever I receive an email with this Google-account I see the blue loading bar at the bottom-right of the UI and this takes a while to load (even when receiving only one email), as long as this loads my Thunderbird is "Not responding". After approximately one minute I can read my new email and work as always (until a new mail comes in and it becomes unresponsive again). Needless to say that this is not very great for working productive and I hope to find a solution, so I don't have to get used to a new mail client.

Currently I'm on 128.1.1 on Windows 11, as said this issue started with the update to 128.0.1 some weeks ago.

Happy to provide more details or test some steps if someone has a helpful idea how to improve things

Hi. Having become frustrated with BT mail I recently installed Thunderbird on two laptops. One laptop runs on Window 11 and the other Linux Mint 21.3 Virginia. If possible I would like to link the Thunderbird calendar on the two machines. I have tried to Google the subject but any discussion/guidance on the issue was beyond my technical competence: which is very limited! From my reading I came to a view (possibly erroneously) that if I maintained the BT calendar I could somehow sync this with the Thunderbird applications on the respective laptops. I would appreciate guidance on whether this is in fact possible and if so is there an idiots guide to doing it? Thank you Tim Ballycarn

TB 128.2.0esr (64b) Setting a decent Date/Time format should be easy, it's not. This is what I tried - https://support.mozilla.org/en-US/kb/customize-date-time-formats-thunderbird I added these formats to Config - intl.date_time.pattern_override.connector_short = {1} {0} intl.date_time.pattern_override.date_short intl.date_time.pattern_override.time_short They had no effect, see screenshot for before and after. 08:42 for today's time and date = good. 9/3/2024, 09:11 the comma is unnecessary, I want it gone, otherwise good. Monday, September 2, 2024, 17:12 after 7 days ultra verbose? Am I missing something?

firstly, i'd like to say this isn't really about settings, well it sort of is, it's about layouts, but there's no heading for that. sorry!

i've just gone from version 102 to version 128. for my use of Thunderbird, nothing much seems to have changed, except some things are now harder. (such is progress!) i would like to see the columns in message lists as proper columns, with headers you can click on. so only one line per message, as it used to be, would suit me just fine. that way i can compare things in the list, which i would say is really important. you can change the sort, and easily see how it effects things.

does anyone know if is there any way to achieve this? i can't see anything in Settings or View. thanks so much.

Some of my older emails, which were in HTML, now appear as text with full headers and formatting data, making them unreadable. How do I convert them back to HTML?

Thunderbird 128.2.0esr (32-bit)

Before the last update, when you assigned a colored label to the message (e.g., work, important, etc.), the entire title, header of the message, took the chosen color. Now you only see a small tag.

'The previous system was definitely more practical. Can it be reactivated?

My PEC mail sends me this error:

Sending username failed. The mail server mail.postecert.it responded: unsupported SASL authentication method

Can this be solved? Thanks

I've read a number of posts regarding using Mail Store Home to enable the transfer of mail from a PST file to TB. I was under the impression that the archive within MSH could be run against a stand-alone PST file (that is, Outlook is not installed). When I select Archive Email as per instructions on other posts, and specify the location of the PST file and then run, I get an error: "This feature requires Microsoft Outlook XP/2003 or higher". Does it require Outlook to be installed, or am I doing something wrong? Also I am a bit unclear of the run sequence with MSH - do I run Archive Email followed by Export Email and what is the connection between the two? Refer to image attached. Thanks.

HELLO,

          SORRY FOR THE CAPS, IM JUST FRUSTRATED!! I PAID A COMPUTER TECH

$90.00 ABOUT 6 MONTHS AGO TO FIX AND OUTGOING MAIL ISSUE, AND HE FIXED THE ISSUED, NOW IT HAS STARTED ALL OVER AGAIN! I HAVE LOOKED AT MANY YOUTUBE VIDEOS AND STILL AHVE NOT SOLVED THE SMTP ISSUE! THIS IS WHAT THE MESSAGE BOX SAYS: SMPT SERVER

         DESCRIPTION SERVER NAME
         PORT 587-DEFAULT 587
         SECURITY AND AUTHENTIFICATION
         CONNECTING SECURITY THIS IS WHAT I PUT STARTTLS
         AUTHENTIFICATION METHOD: NORMAL PASSWORD
         USER NAME I PUT MY EMAIL ADDRESS willowby4@yahoo.com

I TRYING TO FIND OUT SPECIFICALLY WHAT I'M SUPPOSED TO PUT INTHAT BOX!! I WOULD APPRECITATE A RESPONSE PLEASE!

                                                                        THANK YOU FOR YOUR TIME,
                                                                         Deborah H. Sigel
                                                                         willowby4@yahoo.com

ello,

       About 5 months ago I had this same issue and paid a person $90.00 to fix this issue

and erything was working gin until just recently, I have this issue all over again! I cannot afford to keep paying people to fix this all the time is this issue keeps popping up! Now I cannot received or send any outgoing mail!! THE MESSAGE SAYS: SEND MESSAGE ERROR, SENDING OF THE MESSAGE FAILED THE MESSAGE COULD NOT BE SENT BECAUSE THE CONNECTING TO THE OUTGOING SERVER (SMPT) stmp.mail.yahoo.com failed. THE SERVER MAY BE UNAVAILABLE OR IS REFUSING SMPT CONNECTING. PLEASE VERIFY THAT YOUR OUTGOING SERVER (SMPT) SETTINGSD ARE CORRECT AND TRY AGAIN> I'M LOST, I'M NOT THAT TECHMICAL AND NEED HELP! FORGOT TO ADD ME EMAIL FOR WHAT TO DO! willowby4@yahoo.com

Hi. Same question as in https://support.mozilla.org/en-US/questions/1226211  : How can I customize the TB's main menu ?

I would like to remove menu items, which I never use:

• for simplicity
• to avoid accidental deletion (e.g. "delete folder", "delete message", "delete mail marked as junk in folder", etc.)

many thanks!

All of our "read" emails, --from all of our accounts -- have suddenly disappeared. All of the folders and subfolders are still present. We still get new email, but as soon as we read it, it's gone. We have had these same email accounts for years and have not made any changes. In Account Settings --> Synchronization & Storage --> "don't delete any messages" is checked. "Read" messages are still on our server.

So, 1) Why did this happen? 2) Is there any way we can get our messages back in Thunderbird?

After auto update to 115.14.0 64 bit, Get Messages (from GMail) shows Inbox total rising and status shows 250 messages but no new messages appear. Each time I try to download messages the status shows the same number and totals increase by that amount. I've gone from 7000+ to almost 15000 trying various "solutions" i've found and tried. Last messages received were Sept 1st just before the update. Using GMail mail app (tremendously unacceptable) I'm able to view new messages but that app creates copious vacuum (S*KS). Background, I'm running a desktop on and currently updated Win 10 Pro with 400Gb free disk space and using No Thunderbird add-ins. As a long-time user of TB, this came as a big surprise and the only "solutions" I found even partially related were dated 4 or more years ago. These included: deleting certain profile files, disabling firewall, virus protection, and VPN. NoJoy! I'm almost to a point of backup, uninstall, re-install, and re-import but reluctant to do that because of 2 previously failed attempts to recover messages. If that is the only workable solution, please point me to an article that allows me to recover my previous message. Thanks in advance.

To whom it may concern, Not able to send emails using Windows 10 with Windows Defender as my virus and threat protection service. Attached is SMTP Server screenshot. Already tried two other recommended numbers as Port numbers and still was not able to send emails. Thanks in advance for any/all assistance. Tom

Having just re-installed Thunderbird I receive the following error message when trying to set up my gmail account, which had been working fine before

400. 

That’s an error.

The server cannot process the request because it is malformed. It should not be retried. That’s all we know.

The password is correct as I can login from my browser and I have easily setup my other email accounts - not gmail. Also have re-started PC and Thunderbird.

Help please, regards, Haydn